Tag Archives: water heater

Five Different Types Of Water Heaters

Published by:

Modern society requires new technologies that offer more and cost less. The hot water heater is an indispensable device and that is why it is important that efficiency and economy have to be the two main characteristics associated with a newly purchased heating system. Using energy wisely becomes a tactical mission to save money on the utility bills.

Green Water Heaters

Although the efficiency of water heaters varies a lot from model to model, we notice that electric powered heaters bend a little more toward the green side. Heat is transferred to the fluids at a portion of about 98% which significantly more than the 85% of the gas fueled heaters.

But this isn’t the entire reality. Without a doubt the industrial production of electricity is done at an efficiency rate of barely 40%, reaching lows of 15%. This is a bad standard. But thankfully there are technologies like heat pumps which reduces heat loss. Let’s check a couple types of water heaters as well as specifications.

Tankless Coil Water Heaters

These types of water heaters depend on a heat exchanger to get hot water. They work by bringing cold water into the boiler through a pipe, where it is heated using a direct heat source, an open flame. The heated water then exits through the hot water outlet.

Tankless coils work in the same way as an on demand system. Water is heated only when needed, without a tank. They are most effective during the colder seasons because the additional heating of the house helps it perform better. They are not a great option for homes located in warm climates.

Indirect Water Systems

Most people can’t be bothered by a storage tank these days. A home is frequently designed so that you can slot in any appliance you desire. Indirect water heaters might require a storage tank but they’re much more efficient than the previously mentioned model. Given you’ve got the space required, this is a great choice.

These water heaters don’t work like conventional heaters, in the sense that water isn’t heated by the heat source. Instead the heat source is fueled by gas, oil, electricity, and even solar energy. It heats up the liquid which in turn passes throughout the heat exchanger.

The heat exchanger is placed in the tank, where it will constantly raise the temperature of your respective cold water. Provided you have a healthy and operable boiler and insulate the fluids tank properly, this feature might be certainly one of the cheapest ways of getting hot water.

Heat Pump Systems

This can be a system that uses electricity to work. However seeing as only a few places do not have electrical power lines this important aspect shouldn’t be a problem for most people. Let’s look at how this device uses the widely inefficient produced electricity to its fullest.

Electricity is used to power a system of pumps that is effective by pulling the warmth from the surrounding environment and dumping it at a higher temperature straight into the boiler tank. It is so efficient since it doesn’t consume energy to supply heat out of nothing. It uses the existing heat.

The best part is that the heat pumps could be fitted to a standard appliances. You can convert your storage heater with a little investment that may repay in just some months. Only drawback is that heat pump systems require a warm location for installment, otherwise they will not work properly.

Solar Water Heaters

The sun’s rays are becoming a lot more used. Many of us have awakened to the truth that this can be a renewable energy source that can be used quite efficiently. Solar technology continuously evolves to probably become the thing that eventually replaces fossil fuels.

Solar water heaters can run on two types of systems: a direct an indirect one. The direct heating is far more streamlined but seeing as this kind of boiler needs to be outside it encounters the elements. A direct system will better conserve the heat it develops and so will need less energy to heat up fresh water.

Even though it is best you select the most efficient system from the beginning, there are ways you’ll be able to boost your current system. Insulating the pipes and tank and turning off the water heater when you’re not using the water heater are just some of the possibilities. All you need is the desire to conserve energy and a little elbow grease.

One of the great things about our society today is the fact that you can hire a professional hot water tank installation when you need to upgrade. Most plumbing companies are qualified to handle this type of work with proper licensing and the technical know-how to get the job done according to current city codes and heating standards.

When doing your research, here is a great example of a company who installs all types of water heaters

Shamrocks Plumbing and Heating
1325 Elwyn Rd
Kelowna BC, V1X 5M9
Ph: (250) 575-8138